Chrysler 1998 Voyager Service Manual page 1595

NS
DISASSEMBLY AND ASSEMBLY (Continued)
The reverse clutch pack clearance is 0.76 to
1.24 mm (.030 to .049 inch). Select the proper
reverse clutch snap ring to achieve specifications:
REVERSE CLUTCH SNAP RING CHART
All clutch clearances in the input clutch retainer
have now been checked and approved.
To complete the assembly of the input clutch
retainer, the reverse clutch and the overdrive clutch
must be removed from the retainer.
CAUTION: Do not intermix clutch parts. Keep in
exact same order.
Now proceed with the next phase of the assembly:
Fig. 200 Install No. 2 Needle Bearing
TRANSAXLE AND POWER TRANSFER UNIT
Fig. 201 Install Underdrive Shaft Assembly
Fig. 202 Install No. 3 Thrust Washer
Fig. 203 Install No. 3 Thrust Plate
21 - 121