Chrysler 1998 Voyager Service Manual page 1395

NS/GS
REMOVAL AND INSTALLATION (Continued)
Be sure the lines are not contacting each
other or any other component.
(5) Tighten the clamp bracket bolts to 24 N·m (18
ft. lbs.) torque.
(6) Bleed air from the fuel system. Refer to the Air
Bleed Procedure section of this group.
SPECIFICATIONS
FUEL TANK CAPACITY
75 Liters (20.0 Gals.)
Nominal refill capacities are shown. A variation
may be observed from vehicle to vehicle due to man-
ufacturing tolerances, ambient temperatures and
refill procedures.
FUEL SYSTEM—2.5L DIESEL ENGINE/2.0L GAS ENGINE
IDLE SPEED
900 rpm
ing temperature.
FUEL INJECTOR FIRING SEQUENCE
1–3–4–2
FUEL SYSTEM PRESSURE
Peak Injection Pressure/Fuel Injection Pump
Operating Pressure: 40,000–45,000 kPa (5801–
6526 psi).
Opening
15,000–15,800 kPa (2175–2291 psi).
25 rpm with engine at normal operat-
Pressure of Fuel
14 - 27
Injector: