Chrysler 1998 Voyager Service Manual page 1674

21 - 18 A–598 MANUAL TRANSAXLE
REMOVAL AND INSTALLATION (Continued)
Fig. 52 Engine Support Chain — Typical
Fig. 53 Throttle Control Shield
Fig. 54 Throttle Control Support Bracket
(12) Remove the front wheels.
Fig. 55 Shift Cables
(13) Remove the two (2) axle shaft hub nuts.
(14) Remove three upper bellhousing bolts.
(15) Remove steering stop studs at steering knuck-
les.
(16) Remove lower control arm pinch bolts (Fig.
56).
Fig. 56 Lower Control Arm Pinch Bolt
(17) Using a pry bar, unseat lower control arm
from steering knuckle (Fig. 57).
(18) Remove drain plug and drain transaxle fluid
(Fig. 58).
(19) Remove right and left axle shaft assemblies
(20) Remove vehicle speed sensor wiring connector
(Fig. 59).
(21) Remove structural brace from engine and
transaxle.
NS/GS