Chrysler 1998 Voyager Service Manual page 1687

NS/GS
DISASSEMBLY AND ASSEMBLY (Continued)
(17) Apply a bead of Mopar
equivalent onto end cover. Install 5th gear/synchro
end cover. Tighten bolts to 28 N·m (250 in. lbs.).
(18) Move 3–4 shift lug into position. Install 3–4
roll pin at 3–4 shift lug (Fig. 121).
Fig. 121 3–4 Shift Lug Roll Pin
(19) Install 1–2 roll pin at 1–2 shift fork (Fig. 122).
Fig. 122 1–2 Shift Fork Roll Pin
(20) Install reverse pivot lever actuator arm (Fig.
123).
NOTE: When installing shift detents, align the
detent slots in line with the longitudinal axis of the
transaxle (same direction as the shift rails).
NOTE: On some A-598 transaxles all four detent
springs are of the same color and spring tension.
On other A-598 transaxles, three identical springs
are used on the forward gear detents, while the
reverse detent spring is a different tension and
color.
Gasket Maker or
124) (Fig. 125).
A–598 MANUAL TRANSAXLE
Fig. 123 Reverse Pivot Lever Actuator Arm
(21) Install shift detents, springs, and rollers (Fig.
Fig. 124 Shift Detent Rollers
Fig. 125 Shift Detent Springs
(22) Install shift cover splash shield (Fig. 126).
21 - 31