Removing And Installing Hazard Warning Light Switch E3; Removing And Installing Footwell Lights - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
2.6 Removing and installing hazard warning
light switch -E3-
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
♦ When removing and installing components that are in view
(switches, covers, trim), mask off areas where tools ( re‐
moval wedge -VAS 3409- , screwdriver) are used to lever
out those components using commercially available
masking tape.
Removing
– Remove centre vents ⇒ Heating, air conditioning system;
Rep. gr. 80 .
– Disconnect connectors -arrows-.
– Release locking lugs -arrows- and remove hazard warning
light switch -E3- .
Installing
Installation is carried out in reverse order of removal.
2.7

Removing and installing footwell lights

Left footwell light -W9- / right footwell light -W10- are removed and
installed in same way and description is only given for one.
Special tools and workshop equipment required
388
Rep. gr.96 - Lights, bulbs, switches - interior