Volkswagen Golf Variant 2007 Workshop Manual page 382

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
♦ Torque wrench -V.A.G 1783-
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
Removing
Remove trim of rear lid ⇒ General body repairs, interior; Rep. gr.
70 .
– Open wire bracket from wiring harness of reversing camera -
R189- in connector area and remove both wires.
– Disconnect connectors -1- and -2-.
– Remove both nuts -arrows-.
– Detach connector -4-.
– Remove the handle button with reversing camera -R189- -3-
from rear lid.
Remove reversing camera -R189- from handle button
⇒ page 375 .
Installing
Install in the reverse order of removal. When doing this, note the
following:
– Tighten all threaded connections to specified torques
⇒ page 373 .
– Secure wiring of reversing camera -R189- with wiring retainer
to avoid rattling.
– After installation, clean reversing camera -R189- lens with a
lint-free cloth.
– Recalibrate system
374
Rep. gr.94 - Lights, bulbs, switches - exterior
⇒ page 375 .