Volkswagen Golf Variant 2007 Workshop Manual page 235

– Lift dipped beam reflector in headlight slightly and turn the right
headlight range control motor -V49- -1- in -direction of arrow-
on to stop.
– Insert both bolts into the right headlight range control motor -
V49- and tighten, and install the cover cap.
Caution
When installing cover cap, ensure cap is seated correctly. The
ingress of water will lead to permanent damage to the head‐
light.
– Seal the broken-open assembly openings -1- using a sepa‐
rately ordered sealing plug ⇒ ETKA (electronic parts cata‐
logue) .
– Check headlight functions.
– Check headlight settings and adjust headlights if necessary
⇒ Maintenance ; Booklet 20.1 ; Descriptions of work .
1.5.2 Removing and installing headlight range
control motor (Hella)
Note
If control motors are removed and reinstalled or renewed, the
♦
headlight adjustment must be checked and the headlights ad‐
justed ⇒ Maintenance ; Booklet 20.1 ; Description of work .
The illustrations show the renewal of the headlight range con‐
♦
trol motor -V49- on the right headlight.
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
Removing
– Remove headlight ⇒ page 215
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
.
Electrical system - Edition 07.2010
1. Headlights with halogen bulbs (up to MY2009)
227