Volkswagen Golf Variant 2007 Workshop Manual page 422

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
6.4.1 Removing and installing rear interior
light -W45-
Note
If the rear interior light -W45- is removed, the anti-theft alarm
♦
system must be deactivated
The anti-theft alarm ultrasonic sensor -G209- must not be
♦
moved from its preset position (up to MY2009).
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
♦ When removing and installing components that are in view
(switches, covers, trim), mask off areas where tools ( re‐
moval wedge -VAS 3409- , screwdriver) are used to lever
out those components using commercially available
masking tape.
Removing
– Pull entire trim panel -1- (with lens and reflectors) vertically
downwards -arrows- out of rear interior light -W45- .
– Press both locking lugs -2- in -direction of arrow A- and remove
entire rear interior light -W45- -1- in -direction of arrow B- from
moulded headliner.
414
Rep. gr.96 - Lights, bulbs, switches - interior
⇒ page 430 (up to MY2009).