Volkswagen Golf Variant 2007 Workshop Manual page 452

Electrical system
Hide thumbs Also See for Golf Variant 2007:
Table of Contents

Advertisement

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
Removing
– Remove storage compartment -1- on driver side ⇒ General
body repairs, interior; Rep. gr. 68 .
– Push locking catch -1- of relay carrier plug-in connector on
onboard supply control unit -J519- in -direction of arrow A-.
– Push locking catch -2- of plug-in connector of onboard supply
control unit -J519- in direction of -arrow B-.
Note
The plug-in connector of onboard supply control unit -J519- and
of relay carrier on onboard supply control unit -J519- can only be
pulled off after the locking catches have been moved to the
„OPEN" position.
– Detach all connectors of onboard supply control unit -J519-
and of relay carrier on onboard supply control unit -J519- .
Note
The number of connectors depends on the vehicle equipment
level.
– Unclip onboard supply control unit -J519- and of relay carrier
on onboard supply control unit -J519- from retainers
-arrows C-.
– Pull onboard supply control unit -J519- and of relay carrier on
onboard supply control unit -J519- downwards and to rear out
of holder.
Installing
Carry out installation in the reverse sequence, noting the follow‐
ing:
Note
The locking catches cannot be placed in the „CLOSED" position
until all connectors are „fitted" correctly.
444
Rep. gr.97 - Wiring

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 golf variant2005 jetta

Table of Contents