Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
– Remove nut -1- from upper starter bolt.
– Remove wiring retainer -2-.
– Remove upper bolt -arrow- from starter.
– Remove nut of earth wire -1- and place end of earth wire -2-
to one side.
– Remove starter -B- from vehicle upwards.
Installing
Install in the reverse order of removal. When doing this, note the
following:
– Tighten threaded connections to specified torques
⇒ page 14
.
6.2.5
Vehicles with 2.5l petrol engine
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331-
24
Rep. gr.27 - Starter, current supply, CCS