Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
– Release and disconnect connector -1- and remove additional
brake light bulb -M25- -2-.
Installing
Carry out installation in the reverse sequence, noting the follow‐
ing:
Note
Ensure when installing the additional brake light bulb -M25- that
the seal is seated correctly. The seal must not form loops or be
damaged.
– Clip the additional brake light bulb -M25- back into the roof
spoiler starting at the lower edge.
318
Rep. gr.94 - Lights, bulbs, switches - exterior