Calibrating Reversing Camera System - Volkswagen Golf Variant 2007 Workshop Manual

16.3.2 Removing and installing reversing cam‐
era -R189- from handle button
Removing
– Release locking lugs -arrows- and remove housing -1-.
– Pull reversing camera -R189- -1- out of lower part of handle
button -2-.
Installing
Installation is carried out in reverse order of removal.
16.4

Calibrating reversing camera system

Reversing camera -R189- system may have to be recalibrated
following repair work on the vehicle. In detail, this is the case after:
♦ Removing and installing reversing camera -R189-
♦ Accident repairs on rear lid
♦ After vehicle alignment
♦ Repairs to front or rear axle
Extensive preliminary work is required before actual calibration
can be carried out using vehicle diagnosis, testing and information
system -VAS 5051B- . This is described in the following.
Special tools and workshop equipment required
♦ Calibration unit -VAS 6350-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
16. Reversing camera system
375