Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
– Disconnect connector -arrow- on rear of air filter housing.
– Take air filter housing out of vehicle.
– Remove top part of intake manifold.
– Disconnect DF wire connector -1- and pull off protective cap
-2-.
– Unscrew B+ wire -arrow- from alternator -C- .
Caution
Before removing, mark the top side and direction of rotation of
the poly V-belt. When installing, ensure correct fitting position
and direction of rotation. If the belt is installed in the wrong
position or against direction of rotation, the belt will be de‐
stroyed!
– Mark direction of rotation of poly V-belt.
– Release tension of poly V-belt by swivelling tensioning ele‐
ment in direction of -arrow- using an open-jaw spanner.
118
Rep. gr.27 - Starter, current supply, CCS