Removing And Installing Sliding/Tilting Sunroof Glass Panel Automatic Preselection Switch; Checking Parallel Running; Adjusting Parallel Running - Volkswagen Golf 2004 Workshop Manual

Golf 2004 ➤
General body repairs, exterior - Edition 04.2008
• The sliding/tilting sunroof glass panel drive is in 0 position, if
a white dot can be seen in the drive aperture -arrow-.
1.14 Removing and installing sliding/tilting
sunroof glass panel automatic preselec‐
tion switch
– Removing sliding/tilting sunroof glass panel automatic prese‐
lection switch ⇒ Electrical system; Rep. Gr. 96 ; Lights, bulbs,
switches - interior; Removing and installing sliding sunroof
switch
1.15

Checking parallel running

– Removing glass panel for sunroof
The mark -arrow- on the rear of the guide upper section -1- must,
on both sides, lie within the marks dimension -a- on the guide
plate -2-.
The guide plate -2- must be located in the guide rails (cannot be
moved by hand).
1.16

Adjusting parallel running

Note
The parallel running adjustment can only be made when the drive
and glass panel are removed ("0" position).
– Remove sunroof glass panel drive
130
Rep. Gr.60 - Sunroof
⇒ page 123 .
⇒ page 128