Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
1.7.1
Converting headlights designed for driv‐
ing on the right to driving on the left
Note
The headlight conversion set comprises two pieces of film.
♦
Please note the different part numbers for the headlight con‐
♦
version sets from right to left-hand traffic and from left to right-
hand traffic.
Clean headlight lens before converting.
♦
– Turn light switch to position „0".
– Clean headlight lens.
Left headlight:
– Remove protective film on back of assembly film -D- in area
-C- only.
– Align positioning film -D- with the bottom edge to line -B- on
the lens of the headlight.
– Align positioning film -D- at the same time with its radius to line
-A- on the lens of the headlight.
– Push down in area -C- on the headlight lens.
– Carefully pull application film -D- off the lens of the headlight
again.
– The masking film -C- remains on the headlight lens.
Right headlight:
– Remove protective film on back of assembly film -D- in area
-C- only.
– Align positioning film -D- with the bottom edge to line -B- on
the lens of the headlight.
– Align positioning film -D- at the same time with its radius to line
-A- on the lens of the headlight.
– Push down in area -C- on the headlight lens.
– Carefully pull application film -D- off the lens of the headlight
again.
– The masking film -C- remains on the headlight lens.
Note
Remove any remaining adhesive using alcohol-based or al‐
♦
cohol and water-based cleaning fluid. For example, a cloth
soaked with isopropyl alcohol
Customers should be informed of how to remove residual ad‐
♦
hesive after detaching the masking section.
234
Rep. gr.94 - Lights, bulbs, switches - exterior