Alternator C 2.0L Tsi Engine - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
7.17 Alternator -C- 2.0l TSI engine
7.17.1 Assembly overview
1 - Hexagon head flange bolt
❑ 20 Nm
2 - Cross-head screws
❑ 2 Nm
3 - Washer
4 - Cross-head screw
❑ 4.5 Nm
5 - Hexagon nut
❑ 15 Nm
6 - Hexagon nut
7 - Protective cap for alternator
-C-
8 - Cross-head screw
❑ 2 Nm
9 - Voltage regulator -C1-
❑ Removing and installing
⇒ page 169
10 - Alternator -C-
❑ Removing and installing
⇒ page 159
❑ Checking ⇒ page 89
❑ Securing battery posi‐
tive wire ⇒ page 88
❑ Removing and installing
poly V-belt pulley
⇒ page 163
11 - Poly V-belt
❑ Removing and installing
⇒ Engine; Rep. gr. 13
❑ Checking ⇒ page 88
❑ Poly V-belt routing ⇒ Engine; Rep. gr. 13
Not illustrated
♦ Nut of B+ wire on rear of alternator: 15 Nm
♦ Nut of wire holder on back of alternator : 3.2 Nm
♦ Poly V-belt pulley without freewheel: 65 Nm
♦ Poly V-belt pulley with freewheel: 80 Nm
♦ Removing and installing ancillary bracket ⇒ Engine; Rep. gr.
13
158
Rep. gr.27 - Starter, current supply, CCS