Volkswagen Golf Variant 2007 Workshop Manual page 95

– Release and disconnect terminal 50 connector -1-.
– Unscrew nut -2- and remove positive lead -3- from solenoid
switch.
– Remove upper bolt -arrow- from starter.
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 50 .
– Remove nut -1- from lower starter bolt.
– Remove wiring retainer -2-.
– Unscrew starter bolt -arrow-.
– Lower starter -B- out of vehicle.
Installing
Install in the reverse order of removal. When doing this, note the
following:
– Tighten threaded connections to specified torques
⇒ page 60 .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
87
6. Starter B