Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
– Disconnect DF wire connector -1- and pull off protective cap
-2-.
– Unscrew B+ wire -arrow- from alternator -C- .
– Pull fuel filter out of bracket and place to one side. When doing
this, the fuel hoses can remain connected.
Caution
Before removing, mark the top side and direction of rotation of
the poly V-belt. When installing, ensure correct fitting position
and direction of rotation. If the belt is installed in the wrong
position or against direction of rotation, the belt will be de‐
stroyed!
– Mark direction of rotation of poly V-belt.
– Release tension of poly V-belt by swivelling tensioning ele‐
ment in direction of -arrow- using an open-jaw spanner.
– Lock tensioning element using locking pin -T10060A- .
– Remove poly V-belt.
146
Rep. gr.27 - Starter, current supply, CCS