Removing
– Remove cover cap -1-.
– Pull off connector -arrow-.
– Push retaining clip -2- in -direction of arrow- under locking lugs
-1- and lift up retaining clip -2-.
– Take left headlight main beam bulb -M30- -1- out of headlight.
Installing
Caution
♦ Do not touch glass envelope when fitting bulb. Fingers
leave traces of grease on the glass envelope, which evap‐
orate when the bulb is switched on and cause the glass
envelope to cloud over.
♦ When installing cover cap, ensure that it seats properly.
The ingress of water will lead to permanent damage to the
headlight.
Carry out installation in the reverse sequence, noting the follow‐
ing:
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
3. Headlights with gas discharge bulbs (up to MY2009)
265