Removing And Installing Tail Light Bulb Carrier In Side Panel - Saloon - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
– Pull off connector -1-.
– Unscrew securing nuts -2- from tail light in lower part of side
panel.
– Remove tail light.
Installing
Carry out installation in the reverse sequence, noting the follow‐
ing:
– Tighten all threaded connections to specified torques
⇒ page 307 .
Note
Tail light connector in side panel must be „heard" to engage when
reconnecting.
– When installation is complete, check gap/shut lines of tail light
to body.
9.3 Removing and installing tail light bulb
carrier in side panel - saloon
Removing
– Pull off connector -1-.
– Unclip fastening tabs -1- -in direction of arrow- and unhook
bulb carrier from tail light housing -2-.
Installing
Installation is carried out in reverse order of removal.
308
Rep. gr.94 - Lights, bulbs, switches - exterior