Volkswagen Golf Variant 2007 Workshop Manual page 372

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
Caution
♦ The order for removing the senders must be adhered to
under all circumstances.
♦ The sender may otherwise be damaged. Hairline cracks
may occur if too much force is applied to the sender, caus‐
ing the sender to fail.
♦ First remove sender from bracket and then disconnect
sender connector.
– Push fasteners -arrows- on sender holder -1- outwards.
– Pull sender -2- with connected wiring backwards out of sender
holder.
Note
When removing the sender, make sure that the isolation ring
♦
(black silicone ring) on the sender head does not remain in the
sender or become lost.
Expanding the isolation ring must be avoided under all cir‐
♦
cumstances.
– Detach connector -2- and remove sender -1-.
Installing
Install in the reverse order of removal. When doing this, note the
following:
Caution
Function problems could occur if an incorrect or damaged iso‐
lation ring is used.
Expanding the isolation ring must be avoided under all circum‐
stances.
Renew damaged isolation rings and always ensure that the
correct isolation ring is fitted.
Note
As the front parking aid sender and the park assist steering send‐
ers have sender heads of different lengths, isolation rings of
different heights are also installed.
364
Rep. gr.94 - Lights, bulbs, switches - exterior