Removing And Installing Parking Aid Control Unit J446 (8-Channel) - Volkswagen Golf Variant 2007 Workshop Manual

Removing
– Remove right luggage compartment side trim panel ⇒ General
body repairs, interior; Rep. gr. 70 .
– Remove connector -2- on parking aid control unit -J446- -1-.
– Press locking lugs -arrows- of bracket -3- outwards and re‐
move parking aid control unit -J446- -1- from bracket -3-.
Installing
Installation is carried out in reverse order of removal.
14.6 Removing and installing parking aid
control unit -J446- (8-channel)
The parking aid control unit -J446- is located in the driver's foot‐
well, above the relay carrier.
14.6.1 Removing and installing parking aid
control unit -J446- (left-hand drive vehi‐
cle)
The parking aid control unit -J446- is located in the driver's foot‐
well, above the relay carrier.
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
Removing
– Remove trim in driver's footwell ⇒ General body repairs, in‐
terior; Rep. gr. 68 .
– Remove securing screw -arrow- for parking aid control unit -
J446- above relay carrier.
– Remove windscreen wiper system
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 183 .
Electrical system - Edition 07.2010
339
14. Parking aid