Volkswagen Golf Variant 2007 Workshop Manual page 39

– Remove upper bolt -arrow- from starter.
– Remove nut of earth wire -1- and place end of earth wire -2-
to one side in direction of battery -A- .
– Remove starter -B- from vehicle upwards.
Installing
Install in the reverse order of removal. When doing this, note the
following:
– Tighten threaded connections to specified torques
⇒ page 14 .
6.2.7 Vehicles with 2.0l SDI engine
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331-
♦ Torque wrench -V.A.G 1332-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
31
6. Starter B