Removing
– Remove front interior light -W1-
– Turn bulb holder -arrows- of left centre reading light -W39- by
90° to the left.
– Remove bulb holder together with bulb out of left centre read‐
ing light -W39- .
– Carefully pull glass-base bulb out of bulb holder.
– Renew glass-base bulb (12 V/5 W).
Caution
♦ Do not touch glass envelope when fitting bulb. Fingers
leave traces of grease on the glass envelope, which evap‐
orate when the bulb is switched on and cause the glass
envelope to cloud over.
Installing
Installation is carried out in reverse order of removal.
6.2
Front interior light -W1- (with sunroof)
The following components are built into the front interior light -
W1- :
♦ Front interior light -W1-
♦ Left centre reading light -W39-
♦ Right centre reading light -W40-
♦ Sunroof switch -E8-
Components cannot be renewed individually. Complete front in‐
terior light -W1- must be renewed.
– Renew front interior light -W1-
6.2.1
Removing and installing front interior
light -W1-
Special tools and workshop equipment required
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 404
.
⇒ page 407
.
Electrical system - Edition 07.2010
6. Lights and switches in roof trim
407