Alternator C 1.6L Fsi Engine - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
– Secure wire holder -arrow- on back of alternator -C- in 3
o'clock position.
– Tighten threaded connections to specified torques
⇒ page 106 .
– Connect battery -A-
Caution
Observe notes for battery pole terminal clamp bolt
– Start engine and check belt is running correctly.
– Switch off engine.
7.8 Alternator -C- 1.6l FSI engine
7.8.1 Assembly overview
1 - Hexagon bolt
❑ 40 Nm
2 - Washer
3 - Idler roller
4 - Washer
5 - Valve timing housing
6 - Hexagon flange nut
7 - Cross-head screw
❑ 4.5 Nm
8 - Hexagon nut
9 - Washer
10 - Protective cap
11 - Cross-head screws
❑ 2 Nm
12 - Cross-head screw
❑ 2 Nm
13 - Voltage regulator -C1-
❑ Removing and installing
⇒ page 168
14 - Alternator -C-
❑ Removing and installing
⇒ page 111
❑ Checking ⇒ page 89
❑ Securing battery posi‐
tive wire ⇒ page 88
15 - Poly V-belt
❑ Checking ⇒ page 88
❑ Removing and installing
⇒ Engine; Rep. gr. 13
❑ Poly V-belt routing ⇒ Engine; Rep. gr. 13
110
Rep. gr.27 - Starter, current supply, CCS
⇒ page 4 .
⇒ page 1 .