Volkswagen Golf Variant 2007 Workshop Manual page 195

1.3.7 Installing wiper motor -V- in wiper frame
Procedure
– Insert wiper motor -V- with wiper motor control unit -J400- in
wiper frame and secure it with bolts -arrows-.
– Tighten threaded connections to specified torques
⇒ page 183 .
– Place motor crank -1- on shaft of wiper motor -V- .
Distance -a- to limit stop -2- should be 3 ± 1 mm.
– Connect motor crank to shaft of wiper motor -V- using nut
-3-.
– Tighten threaded connections to specified torques
⇒ page 183 .
– Press ball head -arrow- of linkage -1- onto motor crank.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
1. Windscreen wiper system
187