Volkswagen Golf Variant 2007 Workshop Manual page 293

Electrical system
Hide thumbs Also See for Golf Variant 2007:
Table of Contents

Advertisement

Removing
– Release cover cap -2- by turning it anti-clockwise and remove.
– Turn bulb holder -1- in -direction of arrow- and pull it back‐
wards out of reflector together with front right turn signal bulb
-M7- .
– Press locks -arrows- and pull right front turn signal bulb -M7-
-1- out of bulb holder -2-.
Note
The right front turn signal bulb -M7- is permanently attached to
the bulb holder and cannot be dismantled.
Installing
Caution
♦ When installing cover cap, ensure that it seats properly.
The ingress of water will lead to permanent damage to the
headlight.
♦ Do not touch glass envelope when fitting bulb. Fingers
leave traces of grease on the glass envelope, which evap‐
orate when the bulb is switched on and cause the glass
envelope to cloud over.
Carry out installation in the reverse sequence, noting the follow‐
ing:
– Check headlight functions.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
4. Headlights with gas discharge bulbs and cornering lights (from MY2010)
Electrical system - Edition 07.2010
285

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 golf variant2005 jetta

Table of Contents