Volkswagen Golf Variant 2007 Workshop Manual page 119

16 - Hexagon head flange bolts
❑ 23 Nm
17 - Hexagon head flange bolts
❑ 25 Nm
18 - Tensioning element
19 - Bracket
❑ For tensioning element and air conditioner compressor
20 - Hexagon head flange bolt
❑ 20 Nm + 1/4 turn (90 degrees) further
21 - Spacer sleeve
Not illustrated
♦ Nut of B+ wire on rear of alternator: 15 Nm
♦ Nut of wire holder on back of alternator : 3.2 Nm
♦ Poly V-belt pulley without freewheel: 65 Nm
♦ Poly V-belt pulley with freewheel: 80 Nm
♦ Removing and installing ancillary bracket ⇒ Engine; Rep. gr.
13
7.8.2 Removing and installing alternator -C-
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331-
♦ Locking pin -T10060-
Removing
– Disconnect battery -A-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 4 .
Electrical system - Edition 07.2010
111
7. Alternator C