Volkswagen Golf Variant 2007 Workshop Manual page 500

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
7.3.1 Assembly overview - engine wiring harness, top view
1 - Injector connectors, 2-pin
2 - Heat insulation
❑ Note installation posi‐
tion ⇒ page 491
❑ Renew if damaged.
3 - Position sender for charge
pressure positioner -G581-
connector, 3-pin
❑ Note ⇒ 4-cyl. diesel en‐
gine (2.0 l engine, com‐
mon rail); Rep. gr. 21
4 - Bracket to cylinder head
❑ For wiring harness
5 - Connector fuel pressure
regulating valve -N276- , 2-pin
❑ Note ⇒ 4-cyl. diesel en‐
gine (2.0 l engine, com‐
mon rail); Rep. gr. 23
6 - Fuel temperature sender -
G81- connector, 2-pin
❑ Note ⇒ 4-cyl. diesel en‐
gine (2.0 l engine, com‐
mon rail); Rep. gr. 23
7 - Fuel metering valve -N290-
connector, 2-pin
❑ Note ⇒ 4-cyl. diesel en‐
gine (2.0 l engine, com‐
mon rail); Rep. gr. 23
8 - Glow plug connectors
❑ Note ⇒ 4-cyl. diesel en‐
gine (2.0 l engine, com‐
mon rail); Rep. gr. 28
Caution
♦ Connector is surrounded
by a protective sleeve, if
damaged then protective
sleeve can be renewed.
♦ It is essential to comply
with working sequence
»Removing and installing
glow plug connectors«
⇒ page 492 !
9 - Fuel pressure sender -G247- connector, 3-pin
❑ Notes ⇒ 4-cyl. diesel engine (2.0 l engine, common rail); Rep. gr. 23
Removing and installing glow plug connectors
Special tools and workshop equipment required
492
Rep. gr.97 - Wiring