– Disconnect connectors -1- and -2-.
Installing
Installation is carried out in reverse order of removal.
6.4.2
Renewing bulb of rear interior light -
W45-
Note
The anti-theft alarm system must be deactivated when the rear
♦
interior light -W45- bulbs are replaced
MY2009).
The anti-theft alarm ultrasonic sensor -G209- must not be
♦
moved from its preset position (up to MY2009).
Removing
– Switch off ignition and all electrical consumers.
– Pull entire trim panel -1- (with lens and reflectors) vertically
downwards out of rear interior light -W45- .
– Pull glass-base bulb to be removed (12 V/5 W) -1- from bulb
holder.
Caution
♦ Do not touch glass envelope when fitting bulb. Fingers
leave traces of grease on the glass envelope, which evap‐
orate when the bulb is switched on and cause the glass
envelope to cloud over.
Installing
Installation is carried out in reverse order of removal.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
⇒ page 430
(up to
6. Lights and switches in roof trim
415