Esh-Enable Main Source Hot Key; Fcs-Focus - Christie 599 GS Series Technical Reference

ESH–Enable Main Source Hot Key
Allows users to use up to nine hot keys to select the input source.
Commands
Command Description
ESH ? Checks the current value of the Enable
Source Hot Key option.
ESH <0 | 1> Enables or disables the Hot Key function.
Examples
Check the current value of the Enable Source Hot Key option:
(ESH ?)
Result:
(ESH!01)
Where 01 means enabled.
Check the current value of the Enable Source Hot Key option:
(ESH ?)
Result:
(ESH!00)
Where 00 means disabled.
FCS–Focus
Sets the lens focus to an absolute position.
Commands
Command Description
FCS <position> Adjusts the lens focus.
Examples
Move lens focus to position 500:
(FCS 500)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
—
0 = Turns the Hot Key function on (Default)
1 = Turns the hot key function off
Values
n = Increases the focus of the lens by one
p = Decreases the focus of the lens by one
27