Err-Error Log; Esh-Enable Main Source Hot Key; Fcs-Focus; Fmd-Detect Film - Christie GS Series Technical Reference

ERR–Error Log
Displays or clears the error log.
This command is write only.
Commands
Command Description
ERR? Shows the error log.
ERR+CLEAR1 Clears the error log.
ESH–Enable Main Source Hot Key
Allows users to use the zero or nine hot keys to select the input source.
Commands
Command Description
ESH <0 | 1> Enables or disables the hot key function.
FCS–Focus
Sets the lens focus to an absolute position.
Commands
Command Description
FCS <position> Adjusts the lens focus to the specified position.
Examples
Move lens focus to position 500:
(FCS 500)
FMD–Detect Film
Enables or disables film motion detection.
When active, video motion is analyzed to determine if the video input is film (interlaced) or video
(progressive). The analysis allows interlaced content to display correctly.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Serial API commands
Values
—
—
Values
0 = Turns the hot key function on (Default)
1 = Turns the hot key function off
Values
27