Using Print Quality Test - Toshiba e-STUDIO 16P Service Manual

e-STUDIO 16P
Using Print Quality Test Pages t Quality Test Pages
To help isolate print quality problems, like streaking, print test pages
using the print quality test pages setting:
1. Enter the special function menu. See
Function Menu" on page 2-71
2. Press and release the operator panel button twice quickly
(double-button press) four times until the Ready/Data and
Toner Low w LED come on and the bottom two LEDs blink.
3. Press the operator panel button with a long button press (hold
until all the LEDs come on) to initiate Print Quality Test Pages.
Three pages print to help you evaluate print quality. The first
page has registration marks, the second page is gray, and the
third page is black. Once the paper exits into the output bin, the
printer returns to the Ready state.
4. Use the test pages to isolate problems such as print is too light,
toner streaks, and so on. See the Troubleshooting tables for
solutions to these problems.
5. To exit print quality test pages, press the operator panel button
with a long button press (hold until all the LEDs come on).
2-74
Service Manual
for more information.
y test pages, press the operator panel button
"Using the Special
y Test Pages.