Installing Paper; Paper Tray - Toshiba e-Studio 383P User Manual

I
NSTALLING PAPER
P T
APER RAY
NOTE
If you are topping up the paper in a paper tray, it is recommended that you
remove the remaining paper from the tray first then add the new paper stock
followed by the paper you removed. This ensures that the oldest paper is used
first to help prevent paper jams.
1. Remove the paper tray from the bottom of the printer and place plain paper (1) in
the tray, keeping the level of the paper in the tray below the paper full guide
arrowheads shown on the paper guides (2).
NOTE
Load letter headed paper face down and top edge towards the front of the

paper tray (3).

2. Adjust the rear paper support (4) to the size of paper you are using by gripping the
lug, tilting and sliding the support forwards or backwards as necessary.
1
2
Paper recommendations > 24
3