Removing and installing
13 54 017
throttle-valve assembly
–
Open the seat
....................................................See Group 52
a
•
Pull rubber cap (2) down
•
Remove fastener (1) for throttle cable
•
Disengage throttle cable from bracket and cam
disc
•
Disconnect plugs (arrows)
1
2
C1130060
C1130070
•
Loosen plenum chamber/throttle valve hose
clamp (arrow)
•
Release hose clamp (arrow) on intake air duct
with pliers, BMW No. 17 5 500
•
Pull up rear of throttle valve assembly whilst si-
multaneously separating from intake-air duct
•
Remove throttle valve assembly from plenum
chamber by pulling to the front
When installing:
•
Installation is the reverse of the removal proce-
dure
X
Torque specification:
Throttle cable mount ...................................... 8 Nm
Hose clamp.............................................hand-tight
C1130020
17 5 500
C1130080
13.5