[Cruise Control] Removing/Installing Throttle Cables; Preparatory Work For All Bowden Cables; Removing/Installing Throttle-Opener And Throttle-Closer Cables - BMW k 1200 rs Repair Manual

[Cruise control] Removing/
32 73
installing throttle cables
Preparatory work for all Bowden
cables
– Remove left side panels (
d
Warning:
Comply with safety precautions when handling or
working with fuel.
– Remove fuel tank ( 16.5).
a
– Remove left air outlet duct.
1
•
Disconnect plugs (1) of injection valves.
•
Remove fuel injection rail.
•
[Activated charcoal filter] Remove timing valve
from its holder.
•
Remove intake air silencer.
13.14
46.8).
a
KL130040
Removing/installing throttle-
32 72
opener and throttle-closer cables
2
3
8
7
•
Remove screw (5) and remove cover (4).
•
Disengage adjusting screw (7) for throttle-closer
cable (3).
•
Open adjusting screw (8) for throttle-opener
cable (2).
•
Remove throttle-cable relay (6).
•
Disengage throttle-opener cable (2) from its pull
and remove.
•
Disengage throttle-closer cable (3) from its pull.
•
Release cable ties at fairing bracket and pull
throttle cables down toward fuel injection rail to
remove.
2
•
Disengage throttle-opener cable (2) from its pull
at throttle-valve rail.
4
5
6
KL320042
KL130050