http://arttel.ru
6. Create or edit the extension for FXS port.
Analog Station: Select FXS port to be assigned to the extension. By default, it's set to "None".
x
Once selected, analog related settings for this extension will show up in "Analog Settings"
x
section.
7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.
8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in
step 4 as the default destination.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
Figure 51: Configure Extension For Fax Machine
Figure 52: Configure Inbound Rule For Fax
UCM6100 Series IP PBX User Manual
Page 108 of 159