Configuring Customized Services - Zte ZXR10 8900 Series User Manual

Parameter Description:
Parameter
custom|defa
ult

Configuring Customized Services

1. Adding one service.
Command
ZXR10_FW.define#service add name
<string1> protocol <number1> port
<number2>[port2 <number3>][comm
ent <string2>]
Parameter Description:
Parameter
add
name
<string1>
protocol
<number1>
port
<number2>
port2
<number3>
comment
<string1>
Command Illustration:
Services are classified into default services provided by sys-
tem and user customized services. As for default services,
user cannot perform add, delete, modify and some other op-
erations.
Example:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This specifies the type of service to be viewed,
where keyword custom indicates the service is
customized by user and default indicates the
service is the default one in FW system (user
doesn't need to customize it).
Description
This adds one service.
This sets name for the service.
This is one string, indicating name of customized
service.
This sets L3 or L4 protocol number.
This is one number, indicating protocol number.
This sets the start port, from which service is
enabled. In case only one port is available, it
only needs to set start port and doesn't need to
set end port.
This is one number, indicating id of start port.
This sets end port of service.
This is one number, indicating id of end port.
This sets comment.
This s one string, indicating the contents of
comment.
Function
This adds one service.
51