Configuring Load Balancing Group - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
116 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
name
<string>
Command Illustration:
To delete server, it is available to delete the server according
to server name, server id or both. However, in case server
id and server name are inconsistent, server name shall apply.
When no parameter is given, the server not quoted by policy
is deleted.
5. This deletes all servers not quoted by policy.
Command
ZXR10_FW.define #server clean
6. Showing all servers.
Command
ZXR10_FW.define #server show

Configuring Load Balancing Group

This topic describes configuration commands and examples of load
balancing group.
User can add, modify and delete load balancing group in manage-
ment of FW load balancing group.
1. Adding one load balancing group.
Command
ZXR10_FW.define #virtual_server add
name <string1>[server <string2>][b
alance<rr|wrr|lc|wlc|sh|dh>][backup
<number>]
Parameter Description:
Parameter
add
name
<string1>
server
Description
This specifies the name of server to be
deleted.
This is one string, indicating name of the
server.
Function
This deletes all servers
not quoted by policy.
Function
This shows all servers.
Function
This adds one load
balancing group.
Description
This adds one load balancing group.
This sets name for load balancing group.
This is one string, indicating the name of
load balancing group.
This sets the server contained in load
balancing group.