Zte ZXR10 8900 Series User Manual page 90

ZXR10 8900 Series User Manual (FW Volume)
80 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
srcvlan
<string3>
dstvlan
<string4>
src
<string5>
dst
<string6>
service
<string7>
schedule
<string8>
sport
<string9>
orig_dst
<string10>
dpi
<string11>
ar
Description
This sets source VLAN.
This is one string, indicating preset vlan
number.
This sets destination VLAN.
This is one string, indicating preset vlan
number.
This is source address.
This is one string, indicating preset address
name. Multiple address names can be
input and space is used between each two
address names and all address names are
quoted with single quotes, such as 'aa ll'.
This is destination address.
This is one string, indicating preset address
name. Multiple address names can be
input and space is used between each two
address names and all address names are
quoted with single quotes, such as 'aa ll'.
This sets service resource.
This is one string. It must be one or
more names of system default services
or customized services. As for multiple
service names, space is used between
each two service names and all service
names are quoted with single quotes, such
as 'IP ICMP'. The case of names must be
identical with that defined by system, such
as 'IP'. To view service resources, execute
command ZXR10#define service show
default.
This selects time resource, which must be
defined in previous define module.
This is the object name.
This specifies service resource on source
port.
This is one string, which must be
system-predefined service resource name.
This specifies destination address before
NAT.
This is one string, which must be
system-predefined address name.
This sets DPI object.
This specifies object name, which must be
defined in previous DPI module and only
one name can be selected.
This sets application identification policy.