Zte ZXR10 8900 Series User Manual page 47

At the same moment, the total number of connections of all
hosts within the subnet cannot exceed the number of max ses-
sions.
Example:
To rename subnet1 to subnet2, execute the following com-
mand:
ZXR10_FW.define# subnet rename oldname
subnet1 newname subnet2
4. Deleting one subnet.
Command
ZXR10_FW.define#subnet delete [id
<number1>][name <string>]
Parameter Description:
Parameter
delete
id
<number>
name
<string>
Command Illustration:
To delete one subnet, it is available to delete the subnet ac-
cording to subnet name, subnet id or both. However, in case
subnet id and subnet name are inconsistent, subnet name shall
apply.
When no parameter is given, the subnet not quoted by policy
is deleted.
Example:
To delete subnet1, execute the following command:
ZXR10_FW.define# subnet delete name subnet1
5. This deletes all subnets not quoted by policy.
Command
ZXR10_FW.define#subnet clean
6. Showing all subnets.
Command
ZXR10_FW.define#subnet show
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This deletes one subnet.
This specifies ID of the subnet to be deleted.
This is one number, indicating ID of subnet.
This specifies the name of subnet to be deleted.
This is one string, indicating name of the subnet.
Function
This deletes one
subnet.
Function
This deletes all
subnets not quoted by
policy.
Function
This shows all
subnets.
37