Configuring Week Cycle - Zte ZXR10 8900 Series User Manual

Configuring Week Cycle

1. Adding one week cycle.
Command
ZXR10_FW.define#schedule add name
<string1>[cyctype <weekcyc >][week
<string2>][start <string3>][end
<string4>]
Parameter Description:
Parameter
add
name
<string1>
cyctype
<weekcyc >
week
<string2>
week-start
<string3>
week-end
<string4>
Command Illustration:
When specifying that multiple periods are contained in the
week, with no separator among periods.
indicates Monday and Tuesday.
Note:
24-hour time format is used for start time and end time in each
day period. For example 10pm is expressed as 22:00.
Example:
To add week1 with period to be 10am to 18pm each Wednes-
day, execute the following command:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This adds one cycle.
This sets name of cycle.
This is one string, indicating name of cycle.
This sets type of cycle: weekcyc or yearcyc.
The former indicates week cycle and the latter
indicates year cycle.
This indicates week cycle, such as 8am to 8pm
each Monday.
This sets which days are included in one week.
This is one string , indicating one day in the
week, in format of 1234567 (indicating from
Monday to Sunday).
This sets the start time in one day.
This is one string, indicating the start time, in
format of HH:MM (hour:minute).
This sets the end time in each day. End time
must be larger than start time.
This is one string, indicating the end time, in
format of HH:MM (hour:minute).
Function
This adds one week
cycle. Week cycle
indicates this object
contains multiple
uncontinuous regular
period such as 9am to
5pm each Tuesday.
For example, 12
45