Zte ZXR10 8900 Series User Manual page 141

Parameter
<string>
<number>
10. Testing one alarm.
Command
ZXR10_FW.log #alarmnotice test
Command Illustration:
For convenience of user, FW provides alarm testing function.
User can verify effectiveness of alarm rules through testing
after successfully adding alarming mode and setting alarm-
triggered security event.
To add alarm mail1 sent to user@zte.com.cn and set ip address
Example
of SMTP mail server to 192.168.1.2, port id to 25 and subject of
alarm mail to "Mail Alarm", execute the following command:
ZXR10_FW.log # alarmnotice add mail name mail1 srvaddr
192.168.1.2 srvport 25 mailaddr user@zte.com.cn subject Mail alarm
To change the destination mail address to user2@zte.com.cn, ex-
ecute the following command:
ZXR10_FW.log # alarmnotice modify mail name mail1 srvaddr
192.168.1.2 srvport 25 mailaddr user2@zte.com.cn subject Mail alarm
To change mail1 to need authentication and set authentication
username/password to user/user, execute the following command:
ZXR10_FW.log # alarmnotice modify mail name mail1 auth
on username user password user
To delete mail1, execute the following command:
ZXR10_FW.log # alarmnotice delete name mail1
To show the alarm named mail1, execute the following command:
ZXR10_FW.log # alarmnotice show name mail1
To show all alarms, execute the following command:
ZXR10_FW.log # alarmnotice show
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 10 Log and Alarm Configuration
Description
This is a string, indicating the name of
alarm.
This is one number, indicating ID.
Function
This tests one alarm.
131