Zte ZXR10 8900 Series User Manual page 63

Command
ZXR10_FW.define#service rename
oldname <string1> newname
<string2>
Parameter Description:
Parameter
rename
oldname
<string1>
newname
<string2>
Command Illustration:
Services are classified into default services provided by sys-
tem and user customized services. As for default services,
user cannot perform add, delete, modify and some other op-
erations.
Example:
To rename service http8080 to http8000, execute the following
command:
ZXR10_FW.define# service rename oldname
http8080 newname http8000
4. Deleting one customized service.
Command
ZXR10_FW.define#service delete [id
<number1>][name <string>]
Parameter Description:
Parameter
delete
id
<number1>
name
<string>
Command Illustration:
To delete one service, it is available to delete it according to
service name, id or both. In case the two are inconsistent,
service name shall apply.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This renames one service.
This specifies the name of service to be
renamed.
This is one string, indicating the name of service
(the service name has been defined).
This specifies new name for one service.
This is one string, indicating new name of the
service.
Description
This deletes one service.
This specifies ID of the service to be deleted.
This is one number, indicating ID of service.
This specifies the name of service to be deleted.
This is one string, indicating name of the
service.
Function
This renames one
customized service.
Function
This deletes one
customized service.
53