Zte ZXR10 8900 Series User Manual page 52

ZXR10 8900 Series User Manual (FW Volume)
42 Confidential and Proprietary Information of ZTE CORPORATION
Command
ZXR10_FW.define#area add name
<string1>[access <on|off>][ attribute
<string2>][ comment <string3>]
Parameter Description:
Parameter
add
name
<string1>
access
on
off
attribute
<string2>
comment
<string3>
Command Illustration:
Area is section of network space with similar security attribute.
As for ZXR10 8900 Series Switch FW service card, access con-
trol rule uses area to control access.
Example:
To add area_gei_1/1 bound with attribute gei_1/1 and permit
access to this area, execute the following command:
ZXR10_FW.define# area add name area_gei_1/1
access on attribute gei_1/1 comment
2. Modifying one area.
Command
ZXR10_FW.define#area modify name
<string1>[access <on|off>][ attribute
<string2>][ comment <string3>]
Parameter Description:
Parameter
modify
name
Description
This adds one area.
This specifies area name.
This is a string, indicating the name of area.
This specifies privilege for accessing one area.
This permits accessing this area.
This denies accessing this area.
This specifies new attribute or attribute group
bound to this area.
This is one string, which can be one or more
pre-defined attributes or attribute groups. As
for multiple ones, single quotes are used, and
space is used between each two (such as 'aa
bb'); to view and define attribute or attribute
group, perform the operations in attribute and
attribute-group of network module.
This sets comment.
This s one string, indicating the content of
comment.
Description
This modifies one area.
This specifies the name of area to be modified.
Function
This adds one area.
Function
This modifies one
area.