Zte ZXR10 8900 Series User Manual page 135

Parameter
trans
enable|disable
Command Illustration:
Generated log data needs to be managed by log server. Log
server can be any reachable network node (such as PC). This
command can set IP address, port id, transmission format and
other information of log server. By default, IP address of log
server is 192.168.1.253, protocol and port id is udp: 514, log
transmission format is syslog, and log is not transmitted.
2. Setting log level.
Command
ZXR10_FW.log #log level_set
<number>
Parameter Description:
Parameter
<number>
3. Adding log type transmitted to log server.
Command
ZXR10_FW.log #log type_set add
<string>
Parameter Description:
Parameter
<string>
4. Deleting log type transmitted to log server.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 10 Log and Alarm Configuration
Description
This sets whether to transmit log.
Enables indicates transmitting log and
disable indicates not transmitting log.
Function
This sets the levels
at which logs are
transmitted to log
server.
Description
This is one number, indicating log level,
ranging from 0 to 8, where 0 indicates
serious errors that cause unavailability of
system, 1 indicates alarm messages, 2
indicates errors that cause unavailability
of partial system functions, 3 indicates
common error messages, 4 indicates
all attacks and unauthorized accesses
(except for communication log), 5 indicates
operation record of administrator, 6
indicates common event record, 7 indicates
debugging information of developer, and 8
indicates diagnosis log.
Function
This adds log type
transmitted to log
server.
Description
This is one string, indicating log type,
including: mgmt, system, pf, conn, ac,
secure, dpi, vpn, avse, sslvpn_conn,
sslvpn_admin, sslvpn_system, all or none.
125