Zte ZXR10 8900 Series User Manual page 75

Command
ZXR10(config-gei_1/2)#switchport
mode {access|trunk|hybrid}
Command Illustration:
ZXR10 8900 Series SwitchThere are three VLAN link types
for Ethernet interface: Access mode, Trunk mode and Hybrid
mode. Access mode is used by default.
The port connecting with access link can only belong to
�
one VLAN. It shall be untagged and is used to connect PC
in usual cases.
The port connecting with trunk link can belong to multiple
�
vlans. It must be tagged, can receive and send packets of
multiple vlans, and is used to connect two switches in usual
cases.
The port connecting with hybrid link can belong to multiple
�
vlans. User can customize whether to attach tag to the
packet on the port. It can receive and send packets of
multiple vlans and can be used to connect two switches or
to connect pc.
6. Adding an Ethernet interface into a designated vlan (under L2
interface configuration mode)
Command
ZXR10(config-gei_1/2)#switchport
access|trunk|hybrid vlan {<vlan-id
>|<vlan-range >}
Command Illustration:
The port connecting with access link can only belong to one
�
VLAN. It shall be untagged.
The port connecting with trunk link can belong to multiple
�
vlans.
The port connecting with hybrid link can belong to multiple
�
vlans.
7. Setting native VLAN on Ethernet interface (under L2 interface
configuration mode)
Command
ZXR10(config-gei_1/2)#switchport
trunk|hybrid native vlan {<vlan-id
>|<vlan-name>}
Command Illustration:
Trunk port and hybrid port belong to multiple vlans and they
need to set native vlan. If native vlan is set on port, when one
frame with no vlan tag is received on port, it will be forwarded
to the port belonging to this native vlan. Native vlan of trunk
port and hybrid port is vlan 1 by default.
8. Creating VLAN L3 interface
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 ZXR10 FW Function Management
Function
This sets VLAN link
type on Ethernet
interface.
Function
This adds one Ethernet
interface into the
designated VLAN;
Function
This sets native vlan
on Ethernet interface.
65