Managing System Services - Zte ZXR10 8900 Series User Manual

Managing System Services

System services indicate management/monitoring services con-
ducted by FW device, including monitoring service, SSH service,
Telnet service, HTTP service and NTP service.
� Monitoring service is used by user to remotely monitor running
status of this device.
� SSH service is used by user to remotely manage device through
SSH protocol.
� Telnet service is used by user to remotely manage device
through Telnet protocol.
� HTTP service is used by user to remotely manage device
through HTTP protocol.
� NTP service is used to synchronize system time through NTP
protocol.
In factory configuration, only HTTP service is in running status.
To disable this system service, user will fail to manage system
through WebUI. FW system provides control (enable and disable)
over these functions. The detailed commands are as follows:
1. Eabling monitoring service.
Command
ZXR10_FW.system#monitord start
2. Disabling monitoring service.
Command
ZXR10_FW.system#monitord stop
3. Enabling SSH service.
Command
ZXR10_FW.system#sshd start
4. Disabling SSH service.
Command
ZXR10_FW.system#sshd stop
5. Enabling Telnet service.
Command
ZXR10_FW.system#telnetd start
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Management Configuration
Function
This enables
monitoring service.
Function
This disables
monitoring service.
Function
This enables SSH
service.
Function
This disables SSH
service.
Function
This enables Telnet
service.
15