Zte ZXR10 8900 Series User Manual page 124

ZXR10 8900 Series User Manual (FW Volume)
114 Confidential and Proprietary Information of ZTE CORPORATION
User can add, modify or modify and delete server in FW server
management. Server here is mainly used for FW load balancing
function.
To access this command module, execute the following command:
ZXR10_FW #define
To exit from this command module, execute the following com-
mand:
ZXR10_FW #end
1. Adding one server.
Command
ZXR10_FW.define #server add name
<string1> host <string2>[weight<numb
er1>][probe <none|host|service>][port
<number2>]
Parameter Description:
Parameter
add
name
<string1>
host
<string2>
weight
<number1>
probe
none|host|service
port
<number2>
Command Illustration:
With detection, working status of server can be found, thus
avoiding sending traffics to this server when the server is down
or services are abnormal, which makes services requested by
user fail to be responded. Two detection modes are available:
host detection and service detection. Host detection is to verify
if server is online through timely monitoring, which is realized
by executing command ping. Service detection is to perform
detection by selecting corresponding port according to services
provided by server and establishing TCP connection, such as
Function
This adds one server.
Description
This adds one service.
This sets name for the server.
This is one string, indicating name of the
server.
This sets the host used for server.
This is a string, indicating the name of host.
This sets weight of server.
This is one number, indicating weight of
server, ranging from 1 to 100.
This sets whether to perform detection to
server. There are three options: none,
host and service.
None indicates no detection; host indicates
host detection; service indicates service
detection. User needs to set detection port
when selecting service detection.
This sets detection port. Detection
port needs being set only when service
detection is selected.
This is one number, indicating port id.