Zte ZXR10 8900 Series User Manual page 103

Parameter
<src_addr2>
trans_dst
<dst_addr2>
trans_service
<ser_obj>
pat
yes|no
enable
yes|no
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 NAT Configuration
Description
This is one string and source object name
after translation is input here.
Tips:
a) This parameter must be one prede
fined address object name or attribute
name.
b) Only one object can be input here.
c) This parameter is necessary when
adding source address translation poli
cy.
This sets destination object after
translation.
This is one string and destination object
name after translation is input here.
Tips:
a) This parameter must be one prede
fined address object name or attribute
name.
b) Only one object can be input here.
c) This parameter is necessary when
adding destination address translation
policy.
This sets service resource after translation.
This is the number and service resource
name after translation is input here.
Tips:
This parameter must be one name
predefined in define module.
This sets source port translation switch.
YES means conducting port address
translation to source port and no means
not conducting port address translation to
source port.
Tips:
Yes is the default value.
This sets address translation policy switch.
Yes means enabling this address translation
policy and no means forbidding this address
translation policy temporarily.
Tips:
Yes is the default value.
93